I have two Momo Start seats manufactured June 2006, pretty decent shape, no tears I know of in the cover. The passenger side seat has a little more cushion left, but the driver side one isn't totally worn out. Obviously you could easily swap them.
The passenger side seat has a bracket that bolts it directly to the floor using the two front OEM bolt holes and the rear involves some drilling and such through the floor.
The driver side is on a OEM slider which is included. Both seats have oem receivers for the 3pt belt included as well so you can legally use them on the street and pass inspection. The driver side is a simple bolt in affair.
Thinking $400 for the pair of seats, if that's way off base feel free to make me an offer.
The Geforce harnesses are in date until 2018 and are the 6 point Geforce Pro Series in black, they are camlock. They're in good shape as well, the aluminum on the camlocks has gotten a small amount of corrosion spots on them but it's nothing structural, it just wipes off, I suspect it's just from sitting in the car and high humidity. I believe these are the pull down lap belt adjusters if it matter to you.
Looks like new they're about 150/each set, so lets say $150 for the pair of these.
I can grab pictures of this stuff if needed as well.
_________________ 2017 Autocross Chief of Tech
2000 E Street Miata 2015 Focus SE EcoBoost 6 speed 2015 Fiesta ST (Wife's ride) 2012 Yamaha FZ1 sorta crotch rocket? All I know is 150HP and 487 lbs is fun!
|